1. Switch From Automatic Network Configuration Mode to Manual Network Configuration Mode
# netadm enable -p ncp DefaultFixed
2. Verify that DefaultFixed profile is applied
# netadm list
netadm: DefaultFixed NCP is enabled;
automatic network management is not available.
'netadm list' is only supported when automatic network management is active.
3. Determine the interface that you want to configure
# dladm show-phys
4. Configure the vmxnet3s0 interface
# ipadm create-ip net0
# ipadm create-addr -T static -a 192.168.1.10/24 vmxnet3s0/v4
5. Verify
# ipadm show-addr
ADDROBJ TYPE STATE ADDR
lo0/v4 static ok 127.0.0.1/8
vmxnet3s0/v4 static ok 192.168.1.10/24
lo0/v6 static ok ::1/128
root@solaris:~# dladm show-link
LINK CLASS MTU STATE OVER
net0 phys 1500 up --
6. Add default route
# route -p add default 192.168.1.1
7. Add DNS Name Server
root@solaris:~# svccfg -s dns/client
svc:/network/dns/client> setprop config/nameserver = (8.8.8.8 8.8.4.4)
svc:/network/dns/client> listprop config
config application
config/value_authorization astring solaris.smf.value.name-service.dns.client
config/nameserver net_address 8.8.8.8 8.8.4.4
svc:/network/dns/client> exit
root@solaris:~#
root@solaris:~# svcadm refresh dns/client
root@solaris:~# svcadm restart dns/client
8. Set name service switch
root@solaris:~# svccfg -s name-service/switch
svc:/system/name-service/switch> setprop config/host = "files dns"
svc:/system/name-service/switch> listprop config
config application
config/default astring files
config/value_authorization astring solaris.smf.value.name-service.switch
config/printer astring "user files"
config/host astring "files dns"
svc:/system/name-service/switch> exit
9. Testing
root@solaris:~# ping google.com
google.com is alive
10. Change Hostname
root@solaris:~# svccfg <
select /system/identity:node
#listprop config
setprop config/nodename="newhost"
setprop config/loopback="newhost"
refresh
Subscribe to:
Post Comments (Atom)
ALCATEL 6900
write memory copy running certified reload from working no rollback-timeout
-
grant execute on utl_http to wc grant execute on dbms_lock to wc; BEGIN DBMS_NETWORK_ACL_ADMIN.create_acl ( acl => &...
-
:system view system-view or sys :show all config dis current-configuration :create vlan vlan vlan_number :show ip interface ...
-
``` sda: add missing path sda: failed to get udev uid: Invalid argument sda: failed to get sysfs uid: Invalid argument sda: failed to ge...
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.